Fret Buzz: How do I diagnose what is causing it and fix it for good?
Nothing spoils the beautiful, dulcet tones of a good-quality, perfectly tuned guitar. Until one day, you pick that guitar up, strum your favorite chord, and hear the terrible sound of your string buzzing along the neck. You, my friend, are experiencing the dreaded fret buzz.
How humidity causes fret buzz
A lot of the fret buzz we have seen has been due to humidity changes where the guitar is stored.
The guitar neck is (usually) made from wood, which is porous and breathable and can absorb moisture or water particles suspended in the air when the temperature changes. The guitar neck will expand when it absorbs moisture and contract when it dries out.
As temperature and humidity vary throughout the year’s seasons, the guitar’s wood expands and contracts repeatedly. It only sometimes happens consistently. One of the side effects is that the neck can warp or twist. Often only by a few millimeters, but this is usually enough to cause fret buzz on the areas of the neck where string height is low.
Nine times out of ten, we find that the buzzing that is driving the guitar’s owner potty can be fixed simply with a setup to correct the neck’s relief.
Here is a superb and thorough guide from The Wood Database, which explains how wood absorbs moisture and how the absorption and dispersal of water causes wood to shrink in various directions.
Shrinkage can occur across the length (longitudinal), width (tangential), and height (radial) of a piece of wood. And total cumulative (volumetric) shrinkage in all directions.

What other issues cause fret buzz?
Though correcting the neck’s relief is usually the first port of call, it isn’t always the answer to the problem. But whatever the issue, there is a solution.
One thing to clarify before we continue is that diagnosing fret buzz on electric, acoustic, and bass guitars is the same process. However, the method of correcting it does differ due to the variation in bridges between instruments.
There is an order of operations you can follow to ensure you don’t misdiagnose an issue. Fretwork is no small matter, and it can get expensive if you are not doing the work yourself. Developing a keen eye for neck irregularities can save you time, money and effort.
You can often spot things and head them off before you hear them. Preventing issues before they arise will save you a lot of bother down the road.
1. Use your eyes. Have a good look down the neck
Ensure the guitar is in tune so that the correct tension the neck is correctly tensioned. We will look down the length of the neck from the headstock end. We hope to see an apparent, visible twist in the neck, which means half the work is done. You’ve found your issue if it is visible, like the image below.

Not all neck twists will be as visible as this example. Most will be less pronounced. If you are unsure whether or not there is a twist, proceed to step #2. We will next check if the neck is excessively bowed towards or away from the strings.
2. Turn the guitar on its side and look down the neck again from the headstock towards the butt
Make sure to do this two ways. Once with the bass side of the neck on top. Then turn the guitar over to the other side so that the treble side of the neck is on top. Again, you will be at the headstock, looking toward the butt of the guitar.
Truss rod tension will affect the middle of the neck most, so pay special attention to an upbow (where the neck warps away from strings) or a back bow (the opposite) between the 3rd and 9th fret.

While the upbow will cause high action, back bow will move the strings too close to the neck resulting in fret buzz. You must adjust your truss rod to correct upbow or back bow.
We will not cover that in this guide for the sake of brevity, but follow the step-by-step guide we have written in this article.

A perfectly straight neck, or a neck without relief, will prevent the action from being set at its lowest point and can also cause fret buzz. So we’re looking for an ever-so-slight curvature, as pictured below.

3. Check the string height/action at the nut and bridge
The third step along the path to diagnosing the source of your fret buzz is to check your string height in two places – the bridge and the nut.
Starting with the nut, you’ll need a set of feeler gauges to hand. We recommend these from StewMac.

String height measurements at the nut
So, at the nut, take the feeler gauges and measure the height of each string. As a guide, you will want to to see measurements in the range shown in the table below:
| String | Imperial | Metric |
| e | 0.012” | 0.3mm |
| B | 0.012” | 0.3mm |
| D | 0.014” | 0.35mm |
| G | 0.016” | 0.4mm |
| A | 0.018” | 0.45mm |
| E | 0.020” | 0.5mm |
If you need to modify your nut slots here, you’ll need to use some nut slot files to file down any that are too high. You can leave the nut in position when working on it. Strings will need to be loosened and pulled aside, though. Cover the strings, if possible, with a cloth to prevent any shards of loose material from embedding in them.
Take great care not to file too low. Slow and steady wins the race. Ensure you file at a slight increment, well away from the fretboard.
If the headstock of your guitar is at an angle, like below:

You can use it as a visual aid and file parallel to it.
If you file below the measurements listed above, then you’ll need to make a new nut. We have a step-by-step how-to guide on making your very own nut from bone on the way soon. This link will appear here when the article is ready.

Once you have done filing, tune your guitar and strum it open to check for any fret buzz. If you are satisfied, go ahead and line the nut slot with graphite.
Use graphite powder like Kasp Microfine Graphite Powder, or shave down a pencil and draw a line in the slot. Works just as well!
Next, we’ll measure the action at the bridge using a small shop ruler like this one from StewMac.
Bridge action height measurements
| String | Imperial | Metric |
| High E | 2/32″ | 1.6mm |
| Low E | 5/64″ | 2mm |
To achieve these measurements, adjust the necessary string saddles. The bridge style determines the tools required to adjust the saddle height:
- Use hex/Allen keys for hardtail bridge saddles
- Use a flat-head screwdriver for Tune-o-matic and floating bridges
- Floyd Rose systems will require the use of both hex keys and screwdrivers
At this point, we’re beginning to narrow down and eliminate the most common causes for fret buzz.
You’re following the same process many luthiers will go through when diagnosing the problem. If you have completed the steps above and your fret buzz persists, then the next step would be to focus on the frets themselves.
#4. Check for raised frets or uneven fret heights.
So here we’re looking for several things. You might find one or even all of these occurring simultaneously. We’re looking for worn, poorly seated, or dented frets, and any frets higher than they should be.
To check for these issues, we use a tool called a fret rocker.

Again we use this one from StewMac, but there are cheaper alternatives on Amazon.
We lay the fret rocker across three frets at a time, and it should sit flush atop all three frets.
If you can pinpoint where fret buzzing is coming from, you should contrast that area with the heights of surrounding frets. Check immediately before and after the location where the buzz is occurring.
It is a case of removing and replacing if you pinpoint an anomaly like a damaged fret, a high fret, or some uneven frets.
We will post a link to a refretting guide here when ready.
If you have several worn and aged frets, consider a full refret. But make sure that only the frets are worn, and it isn’t just a bowing of the fretboard, as we discussed earlier. The fretboard may need to be evened out.
Ask a luthier or experienced professional for an expert opinion if in doubt.
Still have fret buzz?
This method gives you take a step-by-step approach, helping to eliminate common causes of fret buzz as you go. If you find that you still have some fret buzz, then revisit the steps above as many times as necessary. Perhaps you have missed something somewhere along the line.
If you have taken your action measurements at the nut and bridge, your frets are level and in good condition, and your neck relief is adequate, then it is most likely still an issue with Step #1 where we looked down the neck. You have likely missed a very slight imperceptible twist or warp of the neck.
If the problem persists, then you always have the option of re-radiusing the fretboard or taking your guitar to a professional luthier.

